02) 6264.1921
네트워크 분석기
HOME > 제조사별 > ROHDE & SCHWARZ > 네트워크 분석기
ZVH 휴대용 네트워크 분석기
주요 스펙
- Frequency Range
-
- :100 kHz to 3.6 GHz / 8 GHz
- Output Power
-
- :0 dBm to - 40dBm in 1dB step
- Dynamic Range
-
- :100 dBm typ.
- Number of Point
-
- :631
- Spurious Signal Level
-
- :+17 dBm
특/장점
- BTS 등에 적합한 케이블 / 안테나 측정 솔루션
- 액티브 소자 측정을 위한 DC-Volage supply (bias) 가 탑재
- 측정결과를 SD 또는 USB 메모리에 저장
- Wizard 및 레포트 기능을 이용한 쉬운 동작
- 파워미터 옵션
- 교체 가능 및 최대 4.5 시간 사용가능한 베터리 제공
구매, 기술, 렌탈 문의 이성종 과장 010-4812-3482 / sjlee3482@gmail.com
구매, 기술, 렌탈 문의 이성종 과장 010-4812-3482 / sjlee3482@gmail.com
구매, 기술, 렌탈 문의 이성종 과장 010-4812-3482 / sjlee3482@gmail.com
ZVH 휴대용 네트워크 분석기 옵션
For more efficiency in the field
For more efficiency in the field
소프트웨어 옵션
ZVH-K1 Spectrum Analysis Application
ZVH-K9 Power Meter Measurement Application with FSH-Zxx or NRP-Zxx power sensors
(FSH-Zxx or NRP-Zxx power sensors required; for NRP-Zxx power sensors + NRP-Z4 required (software license)
ZVH-K19 Channel Power Meter
ZVH-K14 Spectrogram Measurement Application
ZVH-K29 Pulse Measurements with Power Sensor (Software License)
(requires R&S?FSH-Z129 for R&S?ZVH4 with serial numbers < 115331 and R&S?ZVH8 with serial numbers < 115239)
(requires R&S?FSH-Z129 for R&S?ZVH4 with serial numbers < 115331 and R&S?ZVH8 with serial numbers < 115239)
ZVH-K39 Transmission Measurement Application
ZVH-K40 Remote Control via USB or LAN Application
ZVH-K42 Vector Network Analysis Application
ZVH-K45 Vector Voltmeter Measurement Application
Accessories
FSH-Z320 RF Cable (length 1 m), N male/N female for FSH-K41 option, DC to 8 GHz
FSH-Z321 RF Cable (length 3 m), N male/N female for FSH-K41 option, DC to 8 GHz
FSH-Z29 Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement
DC to 3.6 GHz for FSH4 / FSH8
DC to 3.6 GHz for FSH4 / FSH8
FSH-Z28 Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement
DC to 8 GHz for R&S?FSH
ZV-Z170 Calibration Kit, 0 Hz to 9 GHz, N (m), 50 Ω Open, Short, Match, Through combination
RAZ Matching Pad, 50 Ω/75 Ω
RAM Matching Pad, 50 Ω/75Ω bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section
FSH-Z38 Matching Pad, 50 Ω/75 Ω, bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W
RDL50 High-Power Attenuator, 50 W, 0 Hz to 6 GHz, 20 dB
RBU100 High-Power Attenuator, 100 W, 0 Hz to 2 GHz 3 dB / 6 dB / 10 dB / 20 dB / 30 dB
TS95A16 GSM/UMTS/CDMA Antenna with magnetic mount, 850/900/1800/1900/2100 band, N connector
HA-Z204 Lithium-Ion Battery Pack, 4.5 Ah
HA-Z206 Lithium-Ion Battery Pack, 6.75 Ah
HA-Z203 Battery Charger for Lithium-Ion battery pack, 4.5 Ah/6.75 Ah
HA-Z202 Vehicle Adapter for Power Supply
HA-Z220 Carrying Bag, soft carrying bag
HA-Z221 Hard Case
HA-Z222 Carrying Holster chest strap and rainproof cover
HA-Z222 Carrying Holster chest strap and rainproof cover
HA-Z223 Shoulder Strap for Carrying Holster
HA-Z240 GPS Receiver
HA-Z211 Spare USB Cable
HA-Z210 Spare LAN Cable
HA-Z201 Spare AC Power Supply
ZVH-Z45 Spare CD ROM with R&S?ZVHView software and documentation
ZVH-Z46 Printed Quick Start Guide for R&S?ZVH, English
ZVH-Z47 Printed Quick Start Guide for R&S?ZVH, German
파워센서
FSH-Z1 Power Sensor, 10 MHz to 8 GHz
FSH-Z18 Power Sensor,10 MHz to 18 GHz
FSH-Z14 Directional Power Sensor, 25 MHz to 1 GHz
FSH-Z44 Directional Power Sensor, 200 MHz to 4 GHz
FSH-Z101 USB Adapter Cable for FSH-Z1 / - Z18, length 1.8 m
FSH-Z129 Adapter cable for R&S?NRP-Z8X
FSH-Z144 USB adapter cable for FSH-Z14/-Z44, length 1.8 m
NRP-Z11 Three-Path Diode Power Sensors Fast, accurate and packed with features for CW and modulated signals
Measurement range: -67 dBm to +23 dBm,
Frequency range: 10 MHz to 8 GHz N connector
Measurement range: -67 dBm to +23 dBm,
Frequency range: 10 MHz to 8 GHz N connector
NRP-Z21 Three-Path Diode Power Sensors Fast, accurate and packed with features for CW and modulated signals
Measurement range: -67 dBm to +23 dBm,
Frequency range: 10 MHz to 18 GHz, N connector
Frequency range: 10 MHz to 18 GHz, N connector
NRP-Z22 Three-Path Diode Power Sensors, Fast, accurate and packed with features for CW and modulated signals
Measurement range: -57 dBm to +33 dBm,
Frequency range: 10 MHz to 18 GHz, N connector
Frequency range: 10 MHz to 18 GHz, N connector
NRP-Z23 NRP-Z23 Three-Path Diode Power Sensors Fast, accurate and packed with features for CW and modulated signals
Measurement range: -47 dBm to +42 dBm,
Frequency range: 10 MHz to 18 GHz, N connector
NRP-Z24 Three-Path Diode Power Sensors Fast, accurate and packed with features for CW and modulated signals
Frequency range: 10 MHz to 18 GHz, N connector
NRP-Z24 Three-Path Diode Power Sensors Fast, accurate and packed with features for CW and modulated signals
Measurement range: -42 dBm to +45 dBm,
Frequency range: 10 MHz to 18 GHz, N connector
NRP-Z31 Three-Path Diode Power Sensors Fast, accurate and packed with features for CW and modulated signals
Frequency range: 10 MHz to 18 GHz, N connector
NRP-Z31 Three-Path Diode Power Sensors Fast, accurate and packed with features for CW and modulated signals
Measurement range: -67 dBm to +23 dBm,
Frequency range: 10 MHz to 33 GHz, 3.5 mm connector
Frequency range: 10 MHz to 33 GHz, 3.5 mm connector
High-Power Attenuator, 100 W
0 Hz to 2 GHz1 NRP-Z41 Three-Path Diode Power Sensors
NRP-Z41 Three-Path Diode Power Sensors Fast, accurate and packed with features for CW and modulated signals
0 Hz to 2 GHz1 NRP-Z41 Three-Path Diode Power Sensors
NRP-Z41 Three-Path Diode Power Sensors Fast, accurate and packed with features for CW and modulated signals
Measurement range: -67 dBm to +20 dBm,
Frequency range: 50 MHz to 40 GHz, 2.92 mm connector
Frequency range: 50 MHz to 40 GHz, 2.92 mm connector
NRP-Z61 Three-Path Diode Power Sensors Fast, accurate and packed with features for CW and modulated signals
Measurement range: -67 dBm to +20 dBm,
Frequency range: 50 MHz to 50 GHz, 2.4 mm connector
Frequency range: 50 MHz to 50 GHz, 2.4 mm connector
NRP-Z81 Wideband Power Sensor, Time domain analysis and automatic pulse analysis for radar applications and universal use
Measurement range: -60 dBm to +20 dBm, Frequency range: 50 MHz to 18 GHz, N connector
NRP-Z51 Thermal Power Sensor Most accurate power measurements for reference applications and use in calibration labs
Measurement range: -35 dBm to +20 dBm
Frequency range: DC to 18 GHz, N connector
Frequency range: DC to 18 GHz, N connector
NRP-Z55 Thermal Power Sensor model .03 Most accurate power measurements for reference applications and use in calibration labs
Measurement range: -35 dBm to +20 dBm,
Frequency range: DC to 40 GHz, 2.92 mm connector
Frequency range: DC to 40 GHz, 2.92 mm connector
NRP-Z55 Thermal Power Sensor model .04 Most accurate power measurements for reference applications and use in calibration labs
Measurement range: -35 dBm to +20 dBm,
Frequency range: DC to 44 GHz, 2.92 mm connector
Frequency range: DC to 44 GHz, 2.92 mm connector
NRP-Z56 Thermal Power Sensor Most accurate power measurements for reference applications and use in calibration labs
Measurement range: -35 dBm to +20 dBm,
Frequency range: DC to 50 GHz, 2.4 mm connector
Frequency range: DC to 50 GHz, 2.4 mm connector
NRP-Z57 Thermal Power Sensor Most accurate power measurements for reference applications and use in calibration labs
Measurement range: -35 dBm to +20 dBm,
Frequency range: DC to 67 GHz, 1.85 mm connector
Frequency range: DC to 67 GHz, 1.85 mm connector
NRP-Z58 Thermal Power Sensor Most accurate power measurements for reference applications and use in calibration labs
Measurement range: -35 dBm to +20 dBm,
Frequency range: DC to 110 GHz, 1.00 mm connector
Frequency range: DC to 110 GHz, 1.00 mm connector
NRP-Z91 Average Power Sensor Accurate average power measurements for EMC applications
Measurement range: -67 dBm to +23 dBm,
Frequency range: 9 kHz to 6 GHz, N connector
Frequency range: 9 kHz to 6 GHz, N connector
NRP-Z92 Average Power Sensor Accurate average power measurements for EMC applications
Measurement range: -57 dBm to +33 dBm,
Frequency range: 9 kHz to 6 GHz, N connector
Frequency range: 9 kHz to 6 GHz, N connector
NRP-Z4 USB Adapter (passive) For all R&S?NRP-Z sensors.
The NRP-Z4 passive USB adapter provides all basic functions,
The NRP-Z4 passive USB adapter provides all basic functions,
as it handles the transmission of settings and measurement data as well as
the power supply of the sensor via the USB bus.
Available cable lenghths: 2.0m, 0.5m, 0.15m and 1m (for panel-mount)
Available cable lenghths: 2.0m, 0.5m, 0.15m and 1m (for panel-mount)
서비스 옵션
WE1ZVH Extended Warranty, one year
WE2ZVH Extended Warranty, two years
WE3ZVH Extended Warranty, three years
WE4ZVH Extended Warranty, four years
CW1ZVH Extended Warranty with Calibration Coverage, one year
CW2ZVH Extended Warranty with Calibration Coverage, two years
CW3ZVH Extended Warranty with Calibration Coverage, three years
CW4ZVH Extended Warranty with Calibration Coverage, four years
